商业银行的授信审批和信贷决策应当遵循哪些原则？()

etwork administrator configure port security on this Ezonexam device？

A．To prevent unauthorized hosts from getting access to the LAN

B．To limit the number of Layer 2 broadcasts on a particular switch port

C．To prevent unauthorized Telnet or SSH access to a switch port

D．To prevent the IP and MAC address of the switch and associated ports

E．None of the above

command on switch VE2. What is the function of this command？

A．It designates VLAN 998 as the default for all unknown tagged traffic

B．It designates VLAN 998 for untagged traffic

C．It blocks VLAN 998 traffic from passing on the trunk

D．It creates a VLAN 998 interface

E．None of the above

sts connectivity to a host that has been newly connected to the network. Which protocols were used during the test？ (Choose two)

A．ARP

B．CDP

C．DHCP

D．DNS

E．ICMP

.The network administrator connected to console port,issued the show ip route command,and was able to ping the server.Based on the output of the show ip route command topology shown in the graphic,what is the cause of the failure？（）

A.IP routing is not enabled

B.A static route is configured incorrectly

C.The network has not fully converged

D.The FastEthernet interface on Coffee is disabled

E.The routing table on Coffee has not updated

F.The neighbor relationship table is not correctly updated

A. Interfaces will automatically detect and build adjacencies with neighbor routers

B. DR and BDR elections will not occur

C. DR and BDR elections will occur

D. The neighbor command is required to build adjacencies

E. All routers must be configured in a fully meshed topology with all other routers

gned to the Marketing VLA.N. Which command will accomplish this task？

A. Show vlan

B. Show mac-address-table

C. Show vtp status

D. show spanning-tree root

E. show ip interface brief

F. None of the above

or a redundant path switched network. What can be done to ensure that VE1 will always assume the role as the root bridge？

A．Assign the switch a higher MAC address than the other switches in the network have

B．Establish a direct link from the switch to all other switches in the network

C．Configure the switch full-duplex operation and configure the other switches for half-duplex operation

D．Configure the switch so that it has lower priority than other switches in the network

E．None of the above

sshown. DHCP clients connected to the FastEthernet0/0 interface are working properly. DHCP clients connected to the FastEthernet0/1 interface are not receiving addresses.Which two statements contain recommendations that will solve the problem？（）

A.The network shown in the output under the ip dhcp pool Central command should be changed to network 10.10.0.0 with a mask of 255.255.255.0

B.A second DHCP pool for network 10 .10.0.0/24 should be configured

C.An ip dhcp excluded - address global configuration command for network 10.10.0.0/24 should be issued

D.The ip helper -address 10.0.0.1 command should be issued so that the address can be added to the Fast Ethernet0/0 c onfiguration

E.The ip helper -address 10.0.0.1 command should be issued so that the address can be added to the Fast Ethernet0/1 configuration

You are the network administrator for Ezonexam.com.

You are planning to install 10 new Windows 2000 Server computers. Ezonexam has a tight production schedule that requires no changes be made to the Active Directory except during scheduled outages. You schedule the installations during an upcoming network outage which will occur betweenmidnight and 8:00 A.M.

You want to complete the installations before production begins in the morning.

What should you do？

A．Perform. the installations by using four floppy disks create with the Makebt32.exe utility.

B．Perform. the installations by using four floppy disks create with the Makeboot.exe utility.

C．Perform. the installations by using the Windows 2000 Installation compact disc.

D．Perform. the installations by using the Windows 2000 Installation compact disc and a floppy disk containing a Winnt.sif file.

of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in the Ezonexam network.

However, you need to share the VLAN information across numerous switches. Which of the following would allow you accomplish this？

A. STP

B. GVRP

C. SNMP

D. VTP

E. DHCP

F. None of the above