假设一个应用每秒产生60 bytes的数据块，每个数据块被封装在一个TCP报文中，然后再封装到一个IP数

A.Switch A - Fa0/0

B.Switch A - Fa0/1

C.Switch B - Fa0/0

D.Switch B - Fa0/1

E.Switch C - Fa0/0

F.Switch C - Fa0/1

A.Switch A - Fa0/0

B.Switch A - Fa0/1

C.Switch B - Fa0/0

D.Switch B - Fa0/1

E.Switch C - Fa0/0

F.Switch C - Fa0/1

A.Packet is destined for a local interface to the router.

B.Packet was translated, but no response was received from the distant device.

C.Packet was not translated, because no additional ports are available.

D.Packet was translated and fast switched to the destination.

A.As numbers must be changed to match on all the routers.

B.Loopback interface must be configured so a DR is elected.

C.The no auto-summary command is needed on Router A and Router C.

D.Router B needs to have two network statements, one for each connected network.

A. Turn off MST (802.1s) on all switches.

B. Turn on MST (802.1s) on all switches.

C. Turn on RSTP (802.1w) on all switches.

D. Turn off RSTP (802.1w) on all switches.

A.All ports will be in a state of discarding, learning, or forwarding.

B.Thirty VLANs have been configured on this switch.

C.The bridge priority is lower than the default value for spanning tree.

D.All interfaces that are shown are on shared media.

E.All designated ports are in a forwarding state.

F.The switch must be the root bridge for all VLANs on this switch.

A. Router R1 will advertise connected and summary routes only.

B. The eigrp stub command will automatically enable summarization of routes on R2.

C. Router R1 is configured as a receive - only neighbor and will not send any connected, static, or summary routes.

D. The eigrp stub command prevents all routes except a default route from being advertised to R1.

E. The eigrp stub command prevents queries from being sent from R2 to R1.

F. Router R1 will advert ise connected and static routes. The sending of summary routes will not be permitted.

A. Router RTA is the BDR

B. Router RTA is directly connected to interface 192.168.45.1

C. Neighbor 192.168.45.1 has changed its OSPF priority number

D. Router RTA and neighbor 192.168.45.2 are exchanging OSPF LSAs

A. DHCPDISCOVER packets will reach the DHCP server.

B. The router will not forward DHCPDIS COVER packets because it has not been configured to do so.

C. This configuration is applied to interface Fa0/1.

D. DHCPDISCOVER packets will not reach the DHCP server because DHCPDISCOVER packets are broadcasts.

E. DHCPDISCOVER packets will not reach the DHCP server because ports 67 and 68 have not been explicitly allowed by the ip forward - protocol command.

F. This configuration is applied to interface Fa0/0.

A. traffic - share balanced

B. distance

C. maximum- paths

D. default - network

E. variance