两个声源其声压级分别是40dB和30dB，则叠加后的声压级为（)dB。A．12B．30C．40D．52

A. Log the administrator password used

B. Test the air temperature

C. Update the network diagram

D. Review the evacuation procedures

A．128M

B．256M

C．512M

D．1024M

he system is running AIX 5.3 TL09 with a64-bit kernel.The administrator has a selection of media available.Which media should the administrator use？（）

A.AnyAIXbootablemedia，providingitisa64-bitvariant

B.AnyAIXbootablemedia，providingitisAIX5.1orlater

C.AnyAIX5.3bootablemedia，providingitisTL09orlater

D.AnyAIX6.1bootablemedia，providingitisTL02orlater

ves reports from the server administrator that servers connected to the new switch seem to be experiencing slow LAN connections. The network administrator checks the port connecting the new switch to the core switch and sees the following information:Which of the following is the MOST likely cause of the slow connections？（）

A. The servers have not had VLAN tagging enabled on their NICs.

B. Speed and duplex have not been set.

C. VLAN tagging was not set on the trunk.

D. The servers have been connected with CAT5 cable.

A. Verify uninterruptible power supply (UPS) load

B. Verify if server consumes 220V

C. Verify CPU load

D. Verify if server consumes 110V

array. When the administrator reaches the option to select the target installation drive, there are no drives listed. Which of the following is the FIRST thing the administrator should do？（）

A. Restart the installation via WDS.

B. Shut down the server and check that all RAID drives are connected properly.

C. Restart the installation from CD and press F6 to install RAID drivers.

D. Go into the BIOS and set all RAID drives to compatibility mode

k. You first install Windows 2000 Professional on one of the new computers.

You log on to the computer by using the local Administrator account. You install Microsoft Office 97, a virus scanner, and other company-standard applications. You then create a RIS image of the computer you configured.

You want to configure the RIS image so that the standard applications will be accessible to the user when the user first logs on to the network. What should you do？

A．Run Rbfg.exe before installing the standard applications.

B．Run RIPrep.exe before installing the standard applications.

C．Copy the All Users profile to the Default Users profile.

D．Copy the local Administrator account profile to the Default Users profile

ta file on the mksysb before installing it on a system. Which of the following procedures is most appropriate to perform？（）

A.Create a new image.data file and recreate the mksysb image.

B.Use the dd command to replace the image.data file on the mksysb tape.

C.Use the tctl command to palce the new image.data file on the mksysb tape.

D.Place the new image.data file on a diskette that will be road during the installation of the mksysb.

a cable into an Ethernet adapter. The tape operator does not have POWER6 595 knowledge.What can the administrator do to assist the tape operator to locate the correct adapter？（）

A.Advise the tape operator to review the hardware service guide.

B.Use the diag command to set the Ethernet adapter slot LED to flash.

C.Advise the tape operator to check the WWN stickers of all Ethernet adapter in the I/O drawers.

D.Create a login account for tape operator on the HMC and advise the tape operator to locate the adapter using the GUI step by step.