题目内容 (请给出正确答案)
[主观题]

Task 1Directions: After reading the following passage, you will find 5 questions or unfini

Task 1

Directions: After reading the following passage, you will find 5 questions or unfinished statements, numbered 36 through 40. For each question or statement there are 4 choices marked A, B, C, and D. You should make the correct choice.

The decline in the auto motive industry began with the oil crisis of 1973—1994, when gasoline prices rose over 300 percent. Almost immediately, consumers began switching to smaller, more fuel-efficient cars, which were the strengths of the major auto importers. This shift in demand from large to smaller cars did not reverse itself later in the 1970s, and the foreign importers continued to gain market share. Detroit's efforts to produce competitive small cars were limited by its continuing expectation that large-car demand would soon resume. So only slowly did the domestic industry put its resources into small-car production, resulting in inadequate supply as well as inadequate concern for quality and performance. During this period, consumers discovered that similarly priced imports generally offered better performance and fewer problems than US-produced cars.

According to a recently-made study named Some Estimates for Major Automotive Producers, even GM, the most cost-efficient US producer averages close to $900 more per car than the least cost-efficient Japanese producer, Toyota.

Notice the single most important factor in Japanese competitiveness is not government subsidies(津贴) or a policy of "dumping" cars in the US market. Rather, it is labor cost. This difference of almost $2,000 per car favors the Japanese producers so strongly that all other comparisons virtually can be ignored.

When did customers begin to prefer smaller cars?

A.In the early 1970s.

B.In the late 1970s.

C.From1973 to 1994.

D.In 1994.

查看答案
如搜索结果不匹配,请 联系老师 获取答案
您可能会需要:
您的账号:,可能会需要:
您的账号:
发送账号密码至手机
发送
更多“Task 1Directions: After readin…”相关的问题

第1题

在调拌模型材料过程中,调拌时间过长或中途加水再调拌产生的主要不良后果是A、容易产生气泡B、降低

在调拌模型材料过程中,调拌时间过长或中途加水再调拌产生的主要不良后果是

A、容易产生气泡

B、降低抗压强度

C、使模型表面粗糙

D、造成脱模困难

E、降低流动性

点击查看答案

第2题

在调拌模型材料过程中调拌时间过长或中途加水再调拌产生的主要不良后果是A、容易产生气泡B、降低抗

在调拌模型材料过程中调拌时间过长或中途加水再调拌产生的主要不良后果是

A、容易产生气泡

B、降低抗压强度

C、造成脱模困难

D、使模型表面粗糙

E、容易产生裂纹

点击查看答案

第3题

在调拌模型材料过程中调拌时间过长或中途加水再调拌产生的主要不良后果是A、容易产生气泡B、使模型

在调拌模型材料过程中调拌时间过长或中途加水再调拌产生的主要不良后果是

A、容易产生气泡

B、使模型表面粗糙

C、降低抗压强度

D、造成脱模困难

E、容易产生裂纹

点击查看答案

第4题

灌注模型产生气泡的常见主要原因是A、模型材料调拌过稀B、印模材料调拌过稠C、模型材料质量不佳D、调

灌注模型产生气泡的常见主要原因是

A、模型材料调拌过稀

B、印模材料调拌过稠

C、模型材料质量不佳

D、调拌和灌注时未充分振荡、排气

E、振荡的力量过大

点击查看答案

第5题

调拌模型材料时,操作不当的是A、掌握好水粉比例B、用调刀均匀搅拌C、调拌时碗内放入适当的粉,再加入

调拌模型材料时,操作不当的是

A、掌握好水粉比例

B、用调刀均匀搅拌

C、调拌时碗内放入适当的粉,再加入适量的水

D、调拌中途,不得加入水或粉

E、均匀搅拌后,放在振荡器上排出气泡

点击查看答案

第6题

调拌模型材料时,操作不当的是A、掌握好水粉比例B、用调刀均匀搅拌C、调拌时碗内放入适当的粉,再加入

调拌模型材料时,操作不当的是

A、掌握好水粉比例

B、用调刀均匀搅拌

C、调拌时碗内放入适当的粉,再加入适量的水

D、调拌中途,不得加入水或粉

E、均匀搅拌后,放在振荡器上排出气泡

点击查看答案

第7题

调拌模型材料时,操作不当的是A、掌握好水粉比例B、用调刀均匀搅拌C、调拌时碗内放入适当的粉,再加入

调拌模型材料时,操作不当的是

A、掌握好水粉比例

B、用调刀均匀搅拌

C、调拌时碗内放入适当的粉,再加入适量的水

D、调拌中途,不得加入水或粉

E、均匀搅拌后,放在震荡器上排出气泡

点击查看答案

第8题

调拌模型材料时,错误的是A、用调拌刀调拌B、水粉比例要恰当C、调拌材料时,先在碗内放入适量的水,再

调拌模型材料时,错误的是

A、用调拌刀调拌

B、水粉比例要恰当

C、调拌材料时,先在碗内放入适量的水,再加入粉

D、均匀搅拌后,放在振荡器上排出气泡

E、调拌时,可以反复来回搅拌

点击查看答案

第9题

防止石膏模型孤立石膏牙折断的最有效措施是A、模型材料调拌均匀B、模型材料调拌稠一些C、模型材料调

防止石膏模型孤立石膏牙折断的最有效措施是

A、模型材料调拌均匀

B、模型材料调拌稠一些

C、模型材料调拌稀一些

D、灌注时插入竹(木)签加强

E、脱模时仔细一些

点击查看答案
热门考试 全部 >
相关试卷 全部 >
账号:
你好,尊敬的上学吧用户
发送账号至手机
密码将被重置
获取验证码
发送
温馨提示
该问题答案仅针对搜题卡用户开放,请点击购买搜题卡。
马上购买搜题卡
我已购买搜题卡, 登录账号 继续查看答案
重置密码
确认修改
谢谢您的反馈

您认为本题答案有误,我们将认真、仔细核查,
如果您知道正确答案,欢迎您来纠错

警告:系统检测到您的账号存在安全风险

为了保护您的账号安全,请在“上学吧”公众号进行验证,点击“官网服务”-“账号验证”后输入验证码“”完成验证,验证成功后方可继续查看答案!

微信搜一搜
上学吧
点击打开微信
警告:系统检测到您的账号存在安全风险
抱歉,您的账号因涉嫌违反上学吧购买须知被冻结。您可在“上学吧”微信公众号中的“官网服务”-“账号解封申请”申请解封,或联系客服
微信搜一搜
上学吧
点击打开微信