What are two reasons why a route might be hidden？（）

A. It occurs every 29 hours.

B. Packet interception mode is enabled.

C. The host is unreachable on the local subnet.

D. The subnet is unreachable using the advertised router.

A. It can reduce routing table size.

B. It allows for optimal route selection.

C. It can reduce the number of routing updates.

D. It always shortens the attribute list for the aggregated route.

A. route selection

B. loop avoidance

C. determining equal cost paths for reachablilty

D. defining the application of other BGP attributes

A. The default route should have a next hop address of 64.100.0.3.

B. Hosts on the LAN that is connected to FastEthernet 0/1 are using public IP addressing.

C. The address of the subnet segment with the WWW server will support seven more servers.

D. The addressing scheme allows users on the Internet to access the WWW server.

E. Hosts on the LAN that is connected to FastEthernet 0/1 will not be able to access the Internet without address translation.

A.The default route should have a next hop address of 64.100.0.3.

B.Hosts on the LAN that is connected to FastEthernet 0/1 are using public IP addressing.

C.The address of the subnet segment with the WWW server will support seven more servers.

D.The addressing scheme allows users on the Internet to access the WWW server.

E.Hosts on the LAN that is connected to FastEthernet 0/1 will not be able to access the Internet without address translation.

Given the following policy, what happens when the 1.1/17 route is evaluated?（）[edit policy-options] policy-statement test{ from { route-filter 0/0 orlonger accept; route-filter 1.1/17 upto /24 reject; route-filter 1.1/18 exact; }then { metric 6; accept; }

A. The route does not match this policy.

B. The route is accepted.

C. The route is rejected.

D. The route is accepted with a metric of 6.

A. It can take on HSRP, VRRP, and GLBP as clients.

B. It provides automatic inbound route optimization.

C. Path selection may be based on delay, loss, or jitter.

D. The border router makes decisions about which outbound path to use.

E. Automatic load distribution is provided for multiple connections.

A.ItcantakeonHSRP，VRRP，andGLBPasclients.

B.Itprovidesautomaticinboundrouteoptimization.

C.Pathselectionmaybebasedondelay，loss，orjitter.

D.Theborderroutermakesdecisionsaboutwhichoutboundpathtouse.

E.Automaticloaddistributionisprovidedformultipleconnections.

A. route selection

B. loop avoidance

C. determining equal cost paths for reachablilty

D. defining the application of other BGP attributes

A. Lower preference values are more preferred than higher preference values.

B. You can modify the default preference values for any of the routing information sources.

C. By default, a static route is more preferred than a RIP route.

D. A static route is always preferred over a direct route.