题目内容（请给出正确答案）

[主观题]

In any NAT （network address translation) configuration, what is the Inside Global IP address？（）

A. The summarized address for all internal subnetted addresses.

B. A private IP address assigned to a host on the inside network.

C. A registered address that represents an inside host to an outside network.

D. A unique IP address used on an internal network

E. Non of the above

查看答案

如搜索结果不匹配，请联系老师获取答案

您可能会需要：

重置密码查看订单联系客服

安装上学吧APP，拍照搜题省时又省心！

更多“In any NAT （network address tr…”相关的问题

第1题

The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）

A. The default administrative distance is used.

B. The command is used to establish a static route.

C. The command is used to configure the router interfaces.

D. The command is used to establish a stub network.

E. The subnet mask for the source address is 255.255.255.0

点击查看答案

第2题

Which of the commands below can you use to configure a default route?（）

A. TK1(config)# ip route 0.0.0.0 0.0.0.0 E0

B. TK1(config)# ip route 0.0.0.0 255.255.255.255 S0

C. TK1(config-interface)# ip route 255.255.255.255 0.0.0.0 192.168.1.21

D. TK1(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.21

E. TK1(config)# ip route 0.0.0.0 192.168.1.21 255.255.255.255

F. TK1# ip default-network 0.0.0.0 192.168.1.21 255.255.255.255

点击查看答案

第3题

Which of the following commands would you use, to configure a default route to any destination NOT found in the routing table?（）

A. Router(config)# ip default-route 0.0.0.0 255.255.255.255 s0

B. Router(config)# ip route 0.0.0.0 255.255.255.255 s0

C. Router(config)# ip default-route 0.0.0.0 0.0.0.0 s0

D. Router(config)# ip route 0.0.0.0 0.0.0.0 s0

E. Router(config)# ip route any any e0

点击查看答案

第4题

You have been asked to configure a default route. Which of the IOS commands mentioned below will accomplish this task?（）

A. LTD(config)# ip route 0.0.0.0 0.0.0.0 192.168.15.36

B. LTD(config)# ip route 0.0.0.0 192.168.15.36 255.255.255.255

C. LTD# ip default-network 0.0.0.0 192.168.15.36 255.255.255.255

D. LTD(config)# ip route 0.0.0.0 0.0.0.0 E0

E. LTD(config)# ip route 0.0.0.0 255.255.255.255 S0

F. LTD(config-router)# ip route 255.255.255.255 0.0.0.0 192.168.15.36

点击查看答案

第5题

You work as a technician at TestKing. You are configuring a Cisco router. You want to configure the IP address on an interface.Which command should you use?（）

A. router(config-if)#ip address 142.8.2.1 subnet mask 255.255.252.0

B. router(config-if)#142.8.2.1 0.0.3.255

C. router(config-if)#ip address 142.8.2.1 255.255.252.0

D. router(config-if)#142.8.2.1 subnet mask 255.255.252.0

E. router(config-if)#ip address 142.8.2.1 0.0.3.255

F. router(config-if)#ip address 142.8.2.1 subnet mask /22

点击查看答案

第6题

Which command will assign the last usable IP address from the 192.168.32.128/28 subnetwork to a router interface?（）

A. TestKingA(config-if)# ip address 192.168.32.142 255.255.255.240

B. TestKingA(config-if)# ip address 192.168.32.143 255.255.255.240

C. TestKingA(config-if)# ip address 192.168.32.158 255.255.255.240

D. TestKingA(config-if)# ip address 192.168.32.145 255.255.255.240

E. TestKingA(config-if)# ip address 192.168.32.144 255.255.255.240

点击查看答案

第7题

You need to set the default gateway of one of your TestKing switches. Which command will set the default gateway to 192.168.12.1 on a Cisco switch?（）

A. Switch(config)# ip default-network 192.168.12.1

B. Switch(config)#ip route-default 192.168.12.1

C. Switch(config)# ip default-gateway 192.168.12.1

D. Swicth(config)# ip route 192.168.12.1 0.0.0.0

点击查看答案

第8题

You are working as an administrator at TestKing, and you need to set the bandwidth of your routers serial port to 56K. Which of the following commands would you use?（）

A. Bandwidth 56000

B. Bandwidth 56000000

C. Bandwidth 56

D. Bandwidth 56kbps

点击查看答案

第9题

You wish to increase the security of all of the routers within your network. What can be done to secure the virtual terminal interfaces on a router?（）

A. Administratively shut down the interface.

B. Physically secure the interface.

C. Create an access list and apply it to the virtual terminal interfaces with the access-group command.

D. Configure a virtual terminal password and login process.

E. Enter an access list and apply it to the virtual terminal interfaces using the access-class command.

点击查看答案

第10题

You wish to limit telnet access into your Cisco router to only a single host. In order to

accomplish this, access list 1 has been written to allow host 172.16.1.224 access to the router vty lines.What command would assign this access- list to the Virtual Terminal Lines?（）

A. router(config-line)# ip access-group 1 in

B. router(config-line)# access-class 1 in

C. router(config-line)# ip access-list 1 in

D. router(config-line)# access-line 1 in

点击查看答案