某钢结构安装工程发生整体倾覆事故，经事故调查，发现是由于设计中，验算吊装承载能力出现失误造成

You want to upgrade all of the critical system files and patches on the server in the shortest possible time.

What should you do？

A．Use Windows Update.

B．Run System File Checker.

C．Log on as administrator and run Windows Update.

D．Log on as administrator and run System File Checker.

You are the administrator of Ezonexam.com's network.

You want to connect your Windows 2000 Professional computer to a new TCP/IP based laser print device. The print device is Plug and Play compliant and is included on the current Hardware Compatibility List (HCL). When you attempt to create a new TCP/IP printer port you receive the following error message:

"Specified Port cannot be added. The port already exists."

You want to be able to use the new TCP/IP printer.

What should you do？

A．Modify the properties of the existing printer port to use the new print device.

B．Change the LPT port setting to bidirectional in the BIOS on your computer.

C．Change the LPT port setting to enable legacy Plug and Play detection on your computer.

D．Obtain and install the WDM-compliant device drivers and printing software for the printer.

You are the administrator for Ezonexam.com's network.

Your network includes Windows 2000 Professional client computers, Windows NT Workstation 4.0 client computers, Windows 98 client computers, and UNIX client computers. Users of the Windows operating systems store files on shared folders on a Windows 2000 Server computer named FileServ.

You want to make the shared folders on FileServ available to the UNIX computers.

What should you do？

A．Install and configure Network File System (NFS) on FileServ.

B．Configure data volumes on FileServ to be FAT volumes.

C．Disable Server Message Block (SMB) signing on FileServ.

D．Install Simple TCP/IP Services on FileServ.

You are a network administrator for Ezonexam.com's Windows 2000 network.

Your network has 200 Windows 2000 Professional computers and 15 Windows 2000 Server computers.

Users on the network save their work files in home folders on a network server. The NTFS partition that contains the home folders has Encrypting File System (EFS) enabled. A user named Jack Bauer leaves the company. You grant her manager the Full Control NTFS permission to Jack's home folder. When the manager attempts to open any of the files, she receives the following error message: "Access is denied."

What should you do？

A．Use System File Checker (SFC) to decrypt the file.

B．Log on the network as the Recovery Agent. Decrypt the files for the manager.

C．Log on the network as the administrator. Use the cipher command to decrypt the files.

D．Log on the network as a member of the Backup Operators group. Decrypt the files for the manager.

You are the administrator of Ezonexam.com's Windows 2000 network.

Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.

You want to be able to access your project files when using either of the operating systems.

What should you do？

A．Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.

B．Configure Disk 2 as a dynamic volume then format as an NTFS partition.

C．Configure Disk 2 to use Encrypting File System (EFS).

D．Configure Disk 2 as a basic volume and format the volume as FAT32.

You are the network administrator for Ezonexam.com.

You create two shared printers on a Windows 2000 Server computer in Ezonexam.com Ezonexam. One printer is shared as Admin, and the other printer is shared as Executive. Both printers are connected to the same print device. You set the priority of the Admin printer to 90 and the priority of the Executive printer to 50.

You want all users at the Ezonexam network to be able to send print jobs to either printer. However, you do not want the Executive printer to appear in the browse list when employees other than executives and administrative assistants create a new printer connection on their client computers.

What should you do？

A．Change the priority of the Executive printer to 99. Change the priority of the Admin printer to 1.

B．Deny the Everyone group the Manage Printers permission.

C．Change the printer configuration to Not Shared.

D．Clear the List in the Directory check box in the printer configuration.

You are the administrator of a Windows NT Server 4.0 computer names Ezonexam1.

Ezonexam1 is a backup domain controller in Ezonexam.com's Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disks 0 and 1 are configured as a Windows NT 4.0 mirror set and contain the operating system files. There are 300 MB of disk space remaining on the Windows NT 4.0 mirror set. Disk 2, 3, and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and currently has 15 GB free. Ezonexam1 runs an application that is used by all of Ezonexam.com's employees.

A new version of the application is available. The new version requires Windows 2000 Server. The application will not run on a domain controller.

You need to install the new application on Ezonexam1 as quickly as possible.

What should you do first？

A．Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.

B．On a second Windows 2000 Server computer, run the sysprep utility to create a cloned server image. Use this image to upgrade Ezonexam1.

C．Upgrade Ezonexam1 to be a Windows 2000 member server. After the upgrade, run the dcpromo utility on Ezonexam1.

D．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.

You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation.

However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional.

You start the computer by using a RIS bootable floppy disk, and you receive the same result.

What should you do？

A．Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.

B．Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.

C．Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.

D．Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.

E．Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.

A．10.1.1.1

B．127.0.0.1

C．192.168.0.1

D．239.1.1.1

A shared folder named Data on the server is on an NTFS partition. The data folder contains more than 200 files. The permissions for the data folder are shown in the following table.

Type of permission Account Permission

Share Users Change

NTFS Users Full Control

You discover that users are connected to the Data folder. You have an immediate need to prevent 10 of the files in the Data folder from being modified. You want your actions to have the smallest possible effects on the users who are using other files on the server.

What two actions should you take？ (Choose Two)

A．Modify the NTFS permissions for the 10 files.

B．Modify the NTFS permissions for the Data folder.

C．Modify the shared permissions for the Data folder.

D．Log off the users from the network.

E．Disconnect the users from the Data folder.