数据库设计的过程中需要建立各种模型。其中,E-R模型属于
A.关系模型
B.概念模型
C.逻辑模型
D.物理模型
A.关系模型
B.概念模型
C.逻辑模型
D.物理模型
第1题
A.172.16.42.0
B.172.16.107.0
C.172.16.208.0
D.172.16.252.0
E.172.16.254.0
第2题
A. DHCP settings
B. BIOS settings
C. DNS settings
D. Power settings
第3题
A.To prevent unauthorized hosts from getting access to the LAN
B.To limit the number of Layer 2 broadcasts on a particular switch port
C.To prevent unauthorized Telnet or SSH access to a switch port
D.To prevent the IP and MAC address of the switch and associated ports
E.None of the above
第4题
A. The EZONEXAM VLAN must be created.
B. The desired ports must be added to the new EZONEXAM VLAN.
C. The EZONEXAM VLAN must be added to all of the domains.
D. The EZONEXAM VLAN must be named.
E. An IP address must be configured for the EZONEXAM VLAN.
F. None of the above. VLAN creations are automatic.
第5题
A.TestKSwitch(config)# ip route-default 192.168.1.115
B.TestKSwitch(config)# ip default-gateway 192.168.1.115
C.TestKSwitch(config)# ip route 192.168.1.115 0.0.0.0
D.TestKSwitch(config)# ip default-network 192.168.1.115
E.None of the above
第6题
A.Create the VLAN.
B.Name the VLAN.
C.Configure an IP address for the VLAN.
D.Add the desired ports to the new VLAN.
E.Add the VLAN to the VTP domain.
第7题
To do this, you enter the following command:
Ezonexam(config)# ip nat inside source static 192.168.2.1
198.18.1.254
You unsuccessfully try to ping the Internet from a PC host on the LAN. During the troubleshooting process, you enter the "show ip nat translations" command but the output is blank.
What is the most likely cause of the problem?
A.The keyword overload is missing from the command.
B.The NAT pool must be defined first.
C.An access list must be defined to create static NAT translations.
D.The interfaces must be configured for NAT.
E.None of the above
第8题
What is the subnet for the host IP address 172.16.210.0/22?
A. 172.16.42.0
B. 172.16.107.0
C. 172.16.208.0
D. 172.16.252.0
E. 172.16.254.0
F. None of the above
第9题
A. router(config-if)#ip address 142.8.2.1 subnet mask 255.255.252.0
B. router(config-if)#142.8.2.1 0.0.3.255
C. router(config-if)#ip address 142.8.2.1 255.255.252.0
D. router(config-if)#142.8.2.1 subnet mask 255.255.252.0
E. router(config-if)#ip address 142.8.2.1 0.0.3.255
F. router(config-if)#ip address 142.8.2.1 subnet mask /22
第10题
A.A remote physical layer problem exists.
B.The host NIC is not functioning.
C.TCP/IP has not been correctly installed on the host.
D.A local physical layer problem exists.
为了保护您的账号安全,请在“上学吧”公众号进行验证,点击“官网服务”-“账号验证”后输入验证码“”完成验证,验证成功后方可继续查看答案!