在下列振动测量的仪器中，（)属于非接触式测量仪器。A．电涡流位移传感器B．磁电速度传感器C．压电式

A. Only configured on the egress router

B. Only configured on the ingress router

C. Is pre-signalled to reduce packet loss

D. Must intersect the primary LSP at two locations

A. one-rate rate limiters

B. two-rate rate limiters

C. two-rate rate limiters is the default

D. one-rate rate limiters is the default

E. there is no default it must be configured

VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.

Which of the conditions below have to be met in order for this to occur？ (Choose all that apply).

A. The switch that will share the VLAN information must be in the VTP Server mode.

B. The switches must be in the same VTP domain.

C. The switch that will share the VLAN information must be configured as the root bridge.

D. The switches must be configured to use the same VTP version.

E. The switches must be configured to use the same STP version.

F. The switches must be configured to use the same type of ID tagging.

G. The switches must be connected over VLAN trunks.

A．LOCAL_ PREF

B． AGGREG ATOR

C． AS_Path

D． Weight

ee OSPF neighbors, one connected to each of its three physical interfaces. Which statement is correct about router C？（）

A. It is configured and functioning correctly as an OSPF internal router.

B. It is configured and functioning correc tly as an ABR attached to stub area 4.

C. It is configured and functioning correctly as an ASBR attached to external area 4.

D. It is configured and functioning correctly as an ABR attached to totally stubby area 4.

E. It is not configured correctly to function as specified.

A. If a packet is sent to a multicast group address, the multicast frame contains the source multicast address.

B. A router does not have to be a member of a multicast group to recei ve multicast data.

C. A router must be a member of a multicast group to send to the group.

D. A router does not have to be a member of a multicast group to send to the group.

E. If a packet is sent to a multicast group address, all members of the multic ast group will receive it.

F. A router must be a member of a multicast group to receive multicast data.

A.A

B.B

C.C

D.D

E.E

F.F

A new switch is installed in the Ezonexam network. This switch is to be configured so that VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.

Which of the conditions below have to be met in order for this to occur？ (Choose all that apply).

A. The switch that will share the VLAN information must be in the VTP Server mode.

B. The switches must be in the same VTP domain.

C. The switch that will share the VLAN information must be configured as the root bridge.

D. The switches must be configured to use the same VTP version.

E. The switches must be configured to use the same STP version.

F. The switches must be configured to use the same type of ID tagging.

G. The switches must be connected over VLAN trunks.

A．hostname

B．host

C．client-name

D．remote-host

A. The router must have one routing protocol configured, but configuration for both routing protocols is not necessary

B. The router must hav e at least one working link connected to each routing domain

C. The redistribute command must be configured under EIGRP to send the routes to OSPF

D. The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF